Down behind enemy lines? Left to fend for yourself? These are the scenarios that inspired the LMF II. Former military man Jeff Freeman led the charge to engineer this fearless new 10" survival knife. And we field tested it with the troops. This knife is as adaptable as the personnel who carry it. Use it to cut through the skin of a fuselage. Or sever a seat belt. Or egress through the Plexiglas of a chopper. Plus, the LMF II does a slick job cutting firewood and building shelter. It can even be lashed to a pole to create a spear.Overall Length: 10.59"
Length of Blade: 4.84"
Weight: 11.4 oz.
"Gerber sent the LMF II prototype to Iraq. A Marine told me it saved his life when he used it to cut a heavy-gauge cable. He also used it to punch through the Plexiglas of a helicopter. Splitting tent stakes shouldn't be a problem."
Anthony Licata, Field & Stream, May 2006
Dear Mark (Gerber Legendary Blades),
"I'm here writing this letter because Gerber's new LMF 2 worked like you sad it would. My spotter and I set our position over a section of road where there had been a great deal of IEDs (improvised explosive devices) placed. There was no moon and it was as dark as it could get. This meant I would be able to see the bad guys with my NVGs (night vision glasses), and they would not be able to see us... which is the way a soldier likes it.
As we began to engage two targets, a larger contingent of bad guys arrived and started looking for us. I decided we should pull back and I radioed for evacuation. We moved to a bombed- compound and set up a defensive position to wait for the helicopter. We were then told that the helo had been diverted to a med evac and we would have to wait for our Bradley's, which were about 10-15 minutes out.. no big deal.
Two of the bad guys moved into the compound. We were waiting for them to come into the open for a clearer shot. As luck would would have it, they turned on a generator. Within seconds, the compound was lit up like a Wal-Mart parking lot, and the two men continued their search.
My spotter and I noticed two 220-volt power lines running along the wall to the floodlights. I remembered you telling me that the handle and the butt cap of the LMF 2 knife were insulated and would not conduct electricity.
I have to admit I wasn't exactly thrilled about the thought of having to cut the "hot lines" but in the battle you do what you have to do.
I moved over to the wall and wedged the knife behind the power lines and used my body weight to cut through the lines, I did turn my head and close my eyes.
I felt the heat from the lines arcing but that was it. I wasn't electrocuted. Darkness returned and our cover was restored. We were able to re-engage while we waited for our evac. The knife blade had a couple of chunks eaten out of it by the high voltage, but when I got back to the compound I worked most of them out with a honing stone. You can still see where the blade was arced. Thank you and your company for this great knife.
SFC Dillard Johnson
Platoon Sergeant 3rd ID 3-7 CAV
